Working So You Can Take a Swim

Pool Leak Troubleshooting Guide To Find The Source Of Leaks

24 April 2020 by Franklin Wilson

If you have problems with your pool water staying at the right level, the issue may be due to leaks and not the heat. Therefore, you want to know how to troubleshoot the leaks and get repairs done to pool equipment or surfaces quickly. The following pool leak troubleshooting guide will help you get to the bottom of leaks and get them repaired quickly.

1. Look for Signs of Sediment Getting in The Pool

Sediments getting in the pool may be the first sign of a pool leak. If you have been doing the necessary maintenance and treatments to the water regularly, but the water still gets cloudy quickly, this could be a sign of a serious problem. Sometimes, these problems are due to the plumbing being damaged. If the problem is with damaged pipes, you will want to contact a pool repair service for help finding and repairing the pipe that is causing the problem.

2. Check the Pool Filter and Pump for Signs of Leaks

The filter and pump could also be the source of leaks and loss of water in your pool. This is an area where even small leaks can cause you to lose water quickly. Check the plumbing around the pump and filter when doing maintenance to ensure they are not leaking. If there are damaged plumbing connections or seals on the filtration equipment, you will want to contact a professional for help with pool repairs.

3. Do Simple Tests to See If the Water Is Leaking or If the Problem Is Only Evaporation

There are also simple tests that you can do to see if the pool is actually leaking. Grab a container and tie it on the side of the pool. Then fill it up to the water level in the pool. If the container and the pool water go down equally, this is usually just evaporation. If the pool water level goes down more than the container, it is due to a leak that is hidden somewhere.

4. Check Pool Surfaces and Drains for Signs of Damage

There are also pool surfaces and drains that can be the sources of the leaks after you have done a simple test for leaks. Inspect the surface of liners or other pool surfaces and look for the damaged areas. Talk to a pool repair contractor about locating and repairing these leaks.

These pool leak troubleshooting tips will help you find the cause of issues with the water in your pool. If you need help repairing the leaks you have found, contact a pool repair contractor like All-American Pools to fix the problem and so you can continue using your pool through the summer.

Share  

Search